Corrugator Start Here

The Corrugator

The Corrugator

Used in conjunction with the Wolff Twice as Sharp®, the new Corru-Gator offers the fastest, easiest and most efficient method of corrugation your scissors and shears!

Wolff’s New Corrugating Machine is fitted with 3/4 inch Diamond Plated Spiral Corrugating Wheel. It also comes equipped with a Twice as Sharp® Clamp and Arm System. Simply edge your shear on your Twice as Sharp® and switch over to your Corru-Gator to cut the teeth!

Designed for Hard to Cut Materials like Kevlar®, Fiberglass, Dyneema®, Spectra® and other Aramid Fire Resistant Materials! It will also produce a perfect corrugation for Barber, Beauty and Grooming Shears!

Diamond Plated Spiral Corrugating WheelDiamond Plated Spiral Corrugating Wheel

Simply hold your shear up against the wheel and it will draw your blade across for you. Creates perfect corrugations ever time!

Arm and ClampArm and Clamp

The Wolff Corru-Gator comes with the same great arm and clamp set up as the Twice as Sharp®. This allows you to set and hold a perfect angle as you corrugate your blade.

Cooling FanCooling Fan

Keeps your unit running cool as you work.

Bi-Directional SwitchBi-Directional Switch

The Bi-Directional Switch allows you to do either right or left hand shears on your Wolff Corru-Gator.

How to Use the Wolff Corru-Gator

It is simple to put the corrugations or serrations on a shear using the Wolff Corru-Gator in conjunction with the Wolff Twice as Sharp®. Once edged on the Twice as Sharp®, the Corru-Gator’s cork-screw wheel draws the shear across itself creating a perfect run of evenly spaced teeth. Wolff’s Corru-Gator is foolproof when it comes to corrugating or serrating grooming shears, barber shears, or industrial shears. See how easy it is in this video.

Q. What is a Corru-Gator

A: The Corru-Gator is designed to create a perfect corrugation on one or both blades of a shear.

Q. What is Corrugation?

A: Corrugation is an industry term describing a series of teeth cut into one or both blades of a shear.

Q. What is the purpose of this Corrugation?

A: The the Corrugation helps hold the medium in place as it is cut. Many Hard-to-Cut Materials like Kevlar®, Fiberglass, Dyneema®, Spectra® and other Aramid Fire Resistant Materials tend to slide out of the shear when cut. A good Corrugation will keep this from happening.

Q. Is the Corru-Gator hard to use?

A: Not at all! Wolff has fitted the Corru-Gator with the same patented Clamp and Arm System they’ve used on their Twice as Sharp® for more than 25 years. Simply insert the shear into the Clamp, lightly hold the shear against the Corrugating Wheel, and the Corru-Gator will cut the teeth for you.

Q. How can a wheel cut the teeth for me?

A: The Corru-Gator comes fitted with a Spiral Cut Diamond Cutting Wheel. The spiral is designed to draw the shear across the Diamond Wheel. The Clamp and Arm Assembly holds the angle for you. All you have to do is apply light/consistent pressure and the machine will do the rest.

Q. Is the Corru-Gator the only machine I’ll need?

A: No, the Corru-Gator works in conjunction with the Twice as Sharp®. Corrugating is just part of the sharpening process. The Twice as Sharp® does the sharpening, the Corru-Gator cut s the teeth.

Q. What else can you tell me about the Corru-Gator?

A: The Corru-Gator comes with a 1 Amp, 1700 RPM motor that is fitted with a cogged belt and step down gear to drop the speed to 377 RPM. The perfect speed for corrugating! It is equipped with a cooling fan and all the necessary safety devices. It also comes with an instruction manual and train video.

Q. What if I have a question about the Corru-Gator?

A: Wolff Industries is dedicated to providing any help you may need when using our products! Simply call us at 1-800-888-3832 and a live operator will be standing by.

Q. Will the video and manual be enough?

A: Absolutely, but training is available through Wolff Industries if you’d like to learn more. Please call and we’ll give you all the details.