Ookami Start Here

Ookami Gold® Convexing Clamp

Ookami Gold® Convexing Clamp

Patented Fixture and Arm Assembly, designed by Roger Kaye of Rapid Edge, Inc. Fixture designed to Sharpen Both Right and Left Hand Shears! The Flat Inside of the Shear is Clamped into the Head of the Fixture Enabling You to Set an Accurate Angle Every Time!

Sliding Arm Allows You to Convex the Entire Front Surface of the Shear! No More Missing the Back Side of the Spine!!

Ergonomically Correct Fixture Mimics Free-Hand Sharpening Perfectly! Variable Speed, forward and Reverse with Quick Change Head! Create a Factory Look and Factory Edge!!!

800 Grit Diamond Wheel800 Grit Diamond Wheel

Cool cutting, fast removal of metal while sharpening, long life; this wheel has it all! It is the finest tool for sharpening scissors and shears on the market.

Ookami Gold Polishing WheelOokami Gold Polishing Wheel

This polyphenolic resin bonded wheel is specially designed to work in conjunction with Wolff’s Ookami Gold Polishing Compound. The combination of the compound and the pliability of the wheel makes creating a cosmetically appealing, razor sharp edge quick and easy.

Ookami Gold Sharpening ArmOokami Gold Sharpening Arm

The free-floating arm assembly attached to the Ookami Gold Scissor Sharpening System allows you to make passes along the edgeof your shear, and allows you to follow all manufacturers’ edge radiuses.

Ookmai Gold Sharpening ClampOokmai Gold Sharpening Clamp

The Clamp that comes with your Ookmai Gold Sharpening Unit will allow you to set a multitude of angles from 0 to over 55 degrees. This sharpening clamp will help you hold an exact angle throughout the process of sharpening your shear.

Ookami Gold® Convexing Clamp Sharpening System Video

This video shows some tips and tricks on how to use the Ookami Gold® Convexing Clamp while sharpening on the Ookami Gold® Sharpening System.

Sharpening on the Ookami Gold® Scissors Sharpening System

This video will show you how to sharpen on the Ookami Gold® scissors sharpening system.

Q. How hard is the Ookami Gold® to use?

A. With Wolff’s specially designed shears-lock clamp and arm assembly, sharpening a shear on the Ookami Gold® is easy. The clamp holds the shear at the proper angle and the arm keeps the shear aligned with each wheel throughout the sharpening process.

Q. How long do the wheels last?

A. The 800 Diamond sharpening wheel will last roughly 1 to 3 years depending on use. The polishing wheel will last about a year, maybe a little longer. These are rough estimates. The amount of pressure used when sharpening plays a big role in this.

Q. How many times can a shear be sharpened on the Ookami Gold®?

A. Most shears can be sharpened about one third of the way into each blade.

Q. How will I know when it’s time to change a wheel?

A. It is time to replace diamond wheel when you can see the diamond coating has worn off the metal hub. The polishing wheel needs to be replaced when the outer edges become to flared, or when the glue gives out and a split forms in the middle of the wheel.